Find an attic ventilation contractor near Queens, NY

How often you should clean your air ducts depends on your situation. If you or someone in the home has asthma or is acutely allergic to certain airborne materials or pollen, regular duct cleaning may be helpful. The Environmental Protection Agency doesn’t have an official position on the necessity of air duct cleaning unless the ducts have been contaminated by rodents, insects or mold, or you are aware of particles blowing out through the vents. The EPA recommends you have your air ducts cleaned on an as-needed basis. The National Air Duct Cleaners Association (NADCA) suggests having air ducts cleaned every three to five years.

Be cautious with companies that offer “whole house air duct cleaning,” urges the NADCA. The company may be using unscrupulous tactics to upsell you once they get started. Before any work begins, always clarify in writing what the job entails and what the cost will be. To protect yourself against fraud, read customer reviews and verify that your HVAC cleaning service has applicable licenses and certifications.

The amount of time air duct cleaning takes can depend on how extensive your duct system is, how old your air ducts are, and whether they have ever been cleaned. On average, expect a standard size home (between 2,000 and 3,000 square feet) to take 2-5 hours for one to two technicians to clean. Here are the proper protocol and equipment you should expect from a professional duct cleaning service, as recommended by the Environmental Protection Agency:

• All doors and access ports opened to ensure the entire duct system is inspected and cleaned.
• Thorough system inspection prior to cleaning to identify possible asbestos-containing materials. If asbestos is present, specially trained and equipped contractors must do the removal.
• Use of approved vacuum equipment that exhausts particles outside of your house. If the vacuum exhausts inside your home, it must be HEPA equipment.
• Furnishings and carpet covered and protected.
• Soft-bristled brushes only on fiberglass duct board and sheet metal ducts internally lined with fiberglass.
• Ductwork properly protected.
• Adherence to guidelines and practices set down by the National Air Duct Cleaners Association.

The national average dryer vent cleaning costs range from $190 to $260. Dryer vent or duct cleaning costs can vary based on where you live in the country and what ductwork repairs may be required. Duct cleaning pros will use a brush cleaning method, a forced air vacuum, or a combination of the two to remove lint and other debris that can collect in your dryer duct, lint trap housing and vent. If left unchecked, this buildup of highly flammable debris can catch fire and lead to a home fire, says the U.S. Consumer Product Safety Commission. In addition to home safety, a great reason for regular cleaning is the money you’ll likely save on energy bills and improved indoor air quality. Pros may offer a lower rate on their dryer duct cleaning costs when you also hire them to clean your entire HVAC duct system. To ensure you’re working with a pro who will keep your home as safe as possible, read their reviews and check whether they have been certified by a reputable organization such as the National Air Duct Cleaners Association (NADCA) or the Chimney Safety Institute of America (CSIA). Many duct cleaning pros will also show you before-and-after photos as proof of the cleaning.

If you’re concerned about dust, allergens or mold, it may be time to have your air ducts cleaned. The national average cost for air duct cleaning ranges from $190 to $250. Air duct cleaning costs will vary based on a number of factors such as your location in the country, the age and condition of your air ducts, the number of linear feet to be cleaned, and any repairs your ducts may need. HVAC cleaning companies should clearly outline what is included in their services and at what rate, so always make sure you understand and have a written agreement before work begins. Here are some examples of average air duct cleaning costs:

• Tiered pricing for different levels of service:
• Standard cleaning: $100, which may include truck-mounted industrial vacuums, high-pressure air wands and air snakes to clean all supply and return vents, branch lines, and main trunk lines.
• Advanced cleaning: $200, which may include standard cleaning services, plus rotobrush or viper clean sweep in the main trunk lines.
• Ultimate cleaning: $400, which may include advanced cleaning, plus insertion of a viper microline into all vents to force debris down the branch lines and into the main trunk lines, to be handled by the viper clean sweep. Typically, all ductwork surface is contacted, before-and-after photos are provided, and the furnace is cleaned.
• A flat rate for unlimited vents: $289.
• Additional fees for larger houses: $20 for each additional 500 square feet over 2,500.

The cost to remodel a home is highly variable — size and scope of the project, quality of materials, and the number of subcontractors required to complete the job all affect the total cost. The average national cost of a home renovation project is $13,500. The national average per-square-foot cost of a remodel ranges from $25 to $100. Nationally, kitchen and bathroom remodels are the most popular types of projects, in part because they typically have the highest return on investment when the home is sold. The national average cost of a major kitchen remodel ranges from $25,000 to $62,000, while the average bathroom remodel tends to cost $6,000 to $18,000. In addition to materials and labor costs, many remodeling project costs include permit fees, which, average $900 or more, depending on your location.

A kitchen remodel is one of the most important investments you can make in your home, and it’s critical to get the details right; that’s where a home renovation contractor comes in. A minor remodel usually includes new cabinet faces and hardware, replacement appliances, and paint, while an extensive job may enlarge the kitchen’s square footage, install new cabinets or an island, change the layout, and lay new tile or hardwood floors. Any renovation that includes filing permits, construction, or electrical or plumbing work is best completed by an experienced contractor who knows local codes.

Hiring a general contractor is a good idea for many remodeling projects. Home renovation contractors have a broad range of skills to manage, coordinate and complete a project. They should help make sure your project comes in on time and within your budget as they hire and supervise all the necessary subcontractors, including electricians and plumbers. They also handle procuring all the materials required for your job. Some homeowners look to save money by acting as their own contractor, but an experienced home renovation contractor is worth the cost. They should know local building codes, be able to pull all necessary permits, and work with inspectors to make sure the construction meets local codes. Also, because they get professional discounts, they can typically buy materials at a better price than you can; better prices on materials and labor save you money, and make up for at least a percentage of the cost of the contractor.

A few home remodeling projects can be done by an ambitious DIY-minded homeowner or local handyman, but many are best completed by a professional home renovation contractor. You should hire a contractor when you’re planning a large project that takes time, machinery or large tools, and several workers; a kitchen remodel, new bathroom or home addition will be most successful with a licensed, expert contractor at the helm. It’s particularly important to have a professional contractor on board for construction, electrical, plumbing and HVAC projects that require inspections to meet local building codes. Of course, you can hire a contractor for smaller projects, too, if you prefer to let an expert handle things like addition or removal of a wall, small framing projects, or anything that requires a permit.  

You should hire a contractor when you’re ready to start a remodeling project and you have plans, a budget and a timeline for the work in hand, but before any remodeling work begins.

Here’s how duct cleaning works in a nutshell:

• A professional duct cleaner will inspect your ducts.
• They’ll use vacuums and brushes to clean up dust and debris.
• And then they’ll seal and clean everything up. 

During the inspection process, the air duct cleaner will also look for cracks or leaks. Depending on what they find, they may also recommend repairs.

To learn more about the duct cleaning process for your home, reach out to cleaners near you.

Air duct cleaning is the process of cleaning your various heating and cooling system units, parts and components. This process often includes cleaning the following, according to the EPA:

• supply and return air ducts and registers
• grilles and diffuser
• heat exchangers heating and cooling coils,
• condensate drain pans (drip pans)
• fan motor and fan housing
• air handling unit housing

For a more specific list of tasks, ask duct cleaners near you what's included in their service.