On average, a concrete patio costs about $2,500-$7,000. The cost to install a concrete patio will vary depending on the size, the finish, whether you want it stamped and many other factors. That’s why you should always get a few cost estimates from professionals when planning this project. 

Use a hose and liquid dish soap to scrub and wash away dirt from your concrete patio. You can also use a pressure washer (just make sure you know how to use it). You can also hire a professional patio cleaner or pressure washing service to help you maintain your patio.

To paint a concrete patio or porch, decide what type of paint you should use. For example, you might want to consider epoxy-based paint for stain resistance and durability. Then, you’ll need to clean and prep the area, fix any cracks and holes, apply a primer and apply two coats of paint.

To ensure the job is done correctly, hire a concrete painter near you.

Hire a concrete staining contractor for this project. These professionals will clean your concrete patio, repair any cracks, and apply the stain and sealer for you. 

Generally, a concrete patio is 4-8 inches thick. Your concrete contractor or patio builder should be able to determine how thick your patio should be.

To fix the crack and holes in your concrete patio, you can apply a concrete repair mix or concrete crack filler. However, for more severe cracks, consider hiring a concrete repair contractor. They have the skills and experience to fill your cracks and holes, ensuring your concrete patio will last as long as possible.

The cost of building a new deck or porch is $1,500. However, this price can vary depending on a few different factors. The square footage of the space, the type of materials to be used, the intricacy of the project and your specific region can cause the price to fluctuate. To find out how much your new deck will cost, get free estimates from the best deck contractors near you.

For more information, read “How much does it cost to build a deck or porch?”

Because unsealed concrete is porous, it readily absorbs liquids, leading to unsightly stains and freeze-and-thaw cycle damage. For this reason, it’s important to seal concrete that will see spills or outdoor weather.

The best option for garage floors and other high-traffic areas is epoxy, which forms a hard and extremely durable surface on top of concrete. Epoxy, acrylic, and polishes are often used on indoor floors, while acrylic-resin sealers and reactive penetrating sealers are used on outdoor surfaces to repel water and salt. Locate a concrete contractor in your area to help find the best solution.

Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.

The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.

 Here are some examples of average costs:

• The national average cost to hire a concrete specialist is $2,750, but that price can vary greatly depending on the work needed to repair and resurface your concrete driveway, the square footage of the project, current costs of concrete, and regional labor rates.
• Driveway contractors average $2-$3 per square foot to smooth and resurface your asphalt driveway.
• Resurfacing concrete driveways averages $3-$10 per square foot. Pricing can depend on repairs needed, project size and geographic location.
• Nationally, the average cost for resurfacing a 500-square-foot driveway ranges from $2,000 to $5,000.
• Sealant for a concrete drive can cost $20-$80 per gallon.
• Sealant for an asphalt drive averages 25 cents per square foot.