Find a wood service near Bloomington, MN

Waterproof or scratch-resistant flooring is typically the best flooring for dogs. This includes: 

• Vinyl: Vinyl may not add much to the value of your home, but it is resistant to scratching, stains, dents and accidents. Plus, it’s an affordable option.
• Tile: Tile is generally water-resistant and scratch-proof, and more affordable than hardwood or stone.
• Laminate: Laminate is not truly waterproof, but it is tough and often more scratch-resistant than other wood floorings. 

Remember that solid hardwood is susceptible to damage, including dents, scratching, licking and accidents. But if you want to install wood floors, the best hardwood floors for dogs are typically made out of maple, Brazilian walnut or bamboo.

For more tips on choosing the best flooring for dogs, talk to one of the best flooring installation professionals near you.

The national average cost to install flooring is $5,500, with prices ranging from $1,000 to $10,000 . Your cost can be much lower or higher depending on the type of flooring you select, the square footage of the project, and other important variables like demolition and repair work needed.

Here are some examples of floor installation costs, depending on the material:

• Laminate flooring: $300 - $4,000
• Vinyl flooring: $1,000 - $4,500
• Radiant floor heating: $1,000 - $10,000
• Wood flooring: $1,500 - $10,000
• Bamboo flooring: $3,500 - $9,000

Reach out to the top flooring installation specialists near you to get an accurate, free estimate of how much it will cost to install flooring in your home.

The disadvantages of vinyl flooring are worth considering for homeowners. Vinyl flooring is difficult to repair if it tears or scratches because you cannot refinish it. And while it imitates more expensive products, it is still usually easy to spot vinyl flooring. This means it might not add to the value of a house, as most buyers would prefer to remove vinyl flooring and replace it with something of a higher quality. Low-quality vinyl flooring is also susceptible to fading and discoloration from sunlight.

For more information on the disadvantages -- and advantages -- of vinyl flooring, reach out to a flooring installation company near you.

Carpenters are trained to work with wood. That means that any part of your home that is built of wood is very likely to involve a carpenter. Framing carpenters will put up the wood that makes up the bones of your home. If you’re having a wood floor installed, it may be done by a carpenter — although being a carpenter is not a requirement to install flooring. Trim, baseboards, wainscoting and any other detail work is typically installed by a finish carpenter. The wood boxes of custom cabinets will be built and installed by a carpenter.

Although all of these components in your new or remodeled home are built by carpenters who specialize in building things with wood, a general contractor typically oversees construction of the entire house. If the general contractor is also a carpenter skilled in all these areas, they may well construct your entire home. More often, the general contractor subcontracts out the various building stages to different individuals, including carpenters.

When installing flooring in your home, keep in mind that some materials are better suited for certain rooms while others are not. Use this guide to help you make the best decision for your home.

Best Flooring for Basements

Basement flooring should be highly resistant to moisture, as many basements are below grade. Choosing the best flooring for basement spaces depends on what they’ll be used for. For example: 

• An epoxy basement floor is a durable finish for concrete.
• Vinyl basement flooring is generally waterproof or water-resistant. 
• Laminate floors can be an affordable option, but they’re often not 100% waterproof.
• Ceramic tile floors are also water-resistant. 

If your basement isn’t moist, carpet tiles are also an option — just make sure to use a moisture barrier.

Best Flooring for Kitchens

Kitchen flooring does more work than almost any floor in the house, so you’ll want to choose a durable floor. The following are among the best flooring types for kitchens:

• Porcelain tiles can be fashionable, moisture-resistant, and cost less than stone or wood to install.
• Vinyl flooring can withstand dents, is generally inexpensive and it’s easy to install.
• Linoleum flooring can be durable, easy to maintain and affordable. 
• Wood flooring could be damaged by dropped pots and pans, furniture and pets. However, hardwood and engineered wood floors in kitchen spaces are still popular among homeowners.

Best Flooring for Bathrooms

Bathroom flooring must withstand high moisture levels while also being comfortable on bare feet. Here are some of the best flooring options for bathrooms: 

• Porcelain tiles are generally comfortable, waterproof, stylish and less costly than stone or wood. 
• Vinyl flooring is waterproof, cost-effective and can imitate wood convincingly.
• Natural stone can be expensive, but it’s typically hard and durable.

Reach out to a flooring installation and repair professional near you to see which type you should install in your home.

Installing oak hardwood floors can add value and beauty to your home. The cost of hardwood floors is typically based on the overall square footage of your new floor, the type of oak you select, any repair work your subfloor requires prior to installation, and any demolition costs to remove your old flooring. Other factors that will affect your total cost can include the regional cost of labor and business overhead of your flooring company.

A flooring installation company may charge $3 per square foot for standard installation. For hand-scraped (higher-end) ¾-inch oak planks, the cost is approximately $7 per square foot, for a total cost per square foot of about $10 as long as no repair work is required. Standard oak planks are available from big-box stores for as low as $3 per square foot, so the quality of oak you want will affect your total project cost.

Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.

Unless you have plenty of experience installing the type of floor you want, it is worth it to hire a professional flooring specialist. 

The first reason is tools — pros have them, and they know how to use them. Without the proper experience, there is a high risk of injury with nail guns and power saws. A good pro also works quickly, saving you time that you could spend doing other things. 

Finally, a pro gets you past options paralysis by helping you decide the best flooring for different rooms and areas of the home.

To get started on your flooring project, contact the best flooring contractors near you today.

After you get new floors installed in your home, make sure you maintain them. Use these tips to keep your floors clean, shiny and polished. 

How to Clean Concrete Floors

Start by sweeping or vacuuming the entire surface to remove loose debris. Mopping will require different substances based on the type of concrete floor. For a polished concrete floor, use a specialized polished concrete cleaner. For a painted concrete floor, use a mild all-purpose cleaner. A sealed concrete floor can be cleaned with dishwashing liquid, while an unsealed floor is best cleaned with trisodium phosphate and stain removers. Use kitty litter or cornstarch for grease stains, and distilled white vinegar for rust stains. 

For more tips on how to clean and maintain your concrete floors, consult with your professional concrete flooring contractor.

How to Clean Hardwood Floors

Cleaning hardwood floors typically requires a mop, bucket and some type of hardwood floor cleaner. Start by removing furniture and objects. Vacuum up all debris (or use a dust mop), moving with the grain. Spray your cleaner on a small section of the floor, and mop in a figure-eight motion, working backward. Make sure there are no puddles. 

In high-traffic areas, you should mop one or two times per week. Low-traffic areas should be mopped at least once per month. 

To ensure you're cleaning and maintaining your hardwood floors properly, speak with your hardwood flooring installation specialist.

How to Clean Laminate Floors:

Start by vacuuming to remove dust, dirt and other debris. The best mop for laminate floors is a microfiber mop with a sprayer feature. Spray and mop one small area at a time to avoid standing liquid on the floor. Go over the floor with a dry microfiber cloth after mopping to make sure all liquid is gone. 

Although you can use a damp mop, never use a wet mop on laminate floors. Moisture can cause the flooring to bubble, swell and buckle. Instead, use a dedicated laminate floor mop with a laminate floor cleaner spray. The best mop for laminate floors is typically made with microfiber, which picks up dirt and absorbs moisture well.

Consulting with your laminate flooring installer is a good idea if you've never had laminate floors and need more tips on how to clean them properly.

How to Clean Vinyl Floors

Cleaning vinyl plank flooring is easy. Start by sweeping and vacuuming up dirt, dust and debris. Then use a damp — not wet — mop or rag with warm water. While vinyl is waterproof, an excessive amount of water can leak between the seams and affect the glue bond with the floor. When you feel a chemical is needed, make sure to choose cleaning products safe for vinyl planks.

Reach out to your vinyl flooring installer for tips on how to further maintain and care for your vinyl floors.

For more tips, read our guide on how to clean and maintain all types of flooring.

Here are four popular types of flooring you can install in your home. 

Solid wood flooring:

Solid wood flooring is made up of 100% wood, and has a very natural look and feel. It can add value to your home and. It can resist wear and tear, and be sanded and refinished multiple times. However, solid wood is susceptible to humidity and water damage. When it’s humid, solid wood could expand and if there’s a flood, it will be hard for the wood to return to its natural shape.

Laminate flooring:

Laminate wood flooring is an artificial product that mimics real wood flooring. Its core consists of fiberboard material, topped by an image print layer and sealed with a clear protective film. Laminate flooring is UV-resistant and less expensive than solid hardwood (approximately $3 to $7 per square foot to install). However, it also has a lower-quality feel, is unable to be sanded and refinished, has a lifespan of around 25 years and will invariably have a repeated print, according to Consumer Reports. 

A laminate hardwood floor is popular in living areas like dining rooms and kitchens. Their quality has improved dramatically in recent years, making them an attractive alternative to more expensive flooring types. Laminate flooring can also be scratch-prone, easy to clean and maintain, and resistant to moisture. 

Vinyl flooring:

Vinyl flooring is made completely out of PVC plastic and is an excellent option for moisture-prone areas like bathrooms and kitchens. It is durable, comfortable and inexpensive. Vinyl plank flooring and vinyl floor tiles can also imitate stone, tile and wood. However, it is fairly easy to spot vinyl flooring as synthetic. Install luxury vinyl plank and sheet vinyl flooring in areas where moisture is a concern.

Engineered wood flooring:

Engineered wood flooring often has a plywood-core substrate and a genuine hardwood veneer as its uppermost layer. Engineered wood floors are more impervious to humidity than regular hardwood, meaning that it’s less likely to expand, warp and buckle, according to Consumer Reports. However, it can dent easily. The best engineered hardwood has a thicker veneer, as well as a quality that allows it to be sanded down and refinished to increase its lifespan. It can be as durable as solid hardwood, and it’s often an affordable choice for many homeowners.

If you need help choosing the best flooring for your home, reach out to the top flooring companies near you.