Find a HVAC technician near Decatur, GA

The most common type of home heating system is a forced-air heating and cooling system. This type of heater involves a furnace, which is commonly powered by natural gas, forcing air through a series of ducts that distribute the hot air through different rooms in a house. Furnaces can run on other types of fuel, including electricity, propane and oil. This type of heating system is quite popular because it doubles as a path for air conditioning in the summer.

An air conditioner leaking inside the house is a common problem. It could indicate that the air filter is dirty. Or, one of the following may be the culprit:

• Clogged condensate drain line
• Leaky, damaged, cracked or rusted drain pan
• Dirty or broken coils
• Frozen evaporator coils
• Broken condensate pump
• Not enough refrigerant
• Disconnected drain line

If your AC is leaking, contact a repair service to find out what the problem is — and how much it will cost to fix it.

Geothermal heating tends to be the most efficient way to heat a house when compared to traditional HVAC systems, according to the U.S. Department of Energy. Geothermal heat pumps (also called ground-source heat pumps) transfer energy to and from the ground to supply heat, cool air and hot water.

Note that one of the most important ways to boost efficiency, save electricity and lower your heating bills is to make sure your house is weather-tight and well-insulated.

The cost of a heating system depends largely on the type and size of the heating system. For example:

• A geothermal heating and cooling system costs about $15,000 and ranges from $7,000 to $30,000. 
• Electric radiant floor heating costs between $9,000 and $20,000 for a 1,600-square-foot home.
• An HVAC heating and cooling system costs around $3,000, with a range between $400 and $6,000.
• Heat pumps cost $1,780 to $3,630 to install.
• And furnace prices range from approximately $700 to $3,000.

To find out how much your new heating system will cost, contact heating and air companies near you and ask for free cost estimates.

While you may be able to do some preparation work for central air installation, you should hire a licensed contractor to complete the project and handle the air conditioning refrigerants. 

Also, unless you have the proper credentials, you risk making common mistakes when installing central air. This may include installing the wrong-size furnace, improperly installing ductwork and exhaust systems, and incorrectly managing drainage.

To ensure your central air is installed correctly, contact the best HVAC pros near you and start getting free estimates today.

A central air unit or HVAC system may add value to your home. Or, if you’re in the process of selling your home, it may help you close a sale.

The Remodeling Impact report found that 20% of realtors have suggested that home sellers replace their HVAC before attempting to sell their homes, and 7% said this project did help close a sale. 

Talk with an expert to figure out if adding an HVAC system is a good idea for your home. And contact the best HVAC pros near you to get free estimates so you’ll know how much this project will cost you.

Depending on where you live, it might be worth it to install central air. Central air makes your house comfortable on hot summer days. And although it’s hard to predict if adding central air will increase your home’s value, prospective homebuyers will certainly notice if it’s missing.

Another advantage of central air is that it can help dehumidify your home. Not only will it make your home more comfortable and enjoyable, but it can also  help prevent mold from growing or spreading.

Contact the best HVAC contractors near you to learn more about the central air installation process and to start receiving free estimates.

The national average dryer vent cleaning costs range from $190 to $260. Dryer vent or duct cleaning costs can vary based on where you live in the country and what ductwork repairs may be required. Duct cleaning pros will use a brush cleaning method, a forced air vacuum, or a combination of the two to remove lint and other debris that can collect in your dryer duct, lint trap housing and vent. If left unchecked, this buildup of highly flammable debris can catch fire and lead to a home fire, says the U.S. Consumer Product Safety Commission. In addition to home safety, a great reason for regular cleaning is the money you’ll likely save on energy bills and improved indoor air quality. Pros may offer a lower rate on their dryer duct cleaning costs when you also hire them to clean your entire HVAC duct system. To ensure you’re working with a pro who will keep your home as safe as possible, read their reviews and check whether they have been certified by a reputable organization such as the National Air Duct Cleaners Association (NADCA) or the Chimney Safety Institute of America (CSIA). Many duct cleaning pros will also show you before-and-after photos as proof of the cleaning.

If you’re concerned about dust, allergens or mold, it may be time to have your air ducts cleaned. The national average cost for air duct cleaning ranges from $190 to $250. Air duct cleaning costs will vary based on a number of factors such as your location in the country, the age and condition of your air ducts, the number of linear feet to be cleaned, and any repairs your ducts may need. HVAC cleaning companies should clearly outline what is included in their services and at what rate, so always make sure you understand and have a written agreement before work begins. Here are some examples of average air duct cleaning costs:

• Tiered pricing for different levels of service:
• Standard cleaning: $100, which may include truck-mounted industrial vacuums, high-pressure air wands and air snakes to clean all supply and return vents, branch lines, and main trunk lines.
• Advanced cleaning: $200, which may include standard cleaning services, plus rotobrush or viper clean sweep in the main trunk lines.
• Ultimate cleaning: $400, which may include advanced cleaning, plus insertion of a viper microline into all vents to force debris down the branch lines and into the main trunk lines, to be handled by the viper clean sweep. Typically, all ductwork surface is contacted, before-and-after photos are provided, and the furnace is cleaned.
• A flat rate for unlimited vents: $289.
• Additional fees for larger houses: $20 for each additional 500 square feet over 2,500.

A new heating system generally takes a few days to install. Jobs that require new ductwork will take more time. And switching to a different type of heat fuel — propane, natural gas, oil or electricity — may require longer installation times as well, as they could require routing piping, regulators and other adjustments to your home.